SONOREX TECHNIK RM 40.2 H-ST Spülbad mit Überlauftasche, Schnittstelle und Heizung

Description

Sink for industry, service and maintenance. The welded oscillating tank made of stainless steel 1.4404, 2 mm guarantees maximum durability even with intensive use. A modular design enables a wide range of configurations from a single cleaning tank to a complete cleaning line. The integrated overflow pocket is used to connect an oil separator for separating cleaned oil films from the cleaning solution

The integrated overflow pocket is used to connect an oil separator to separate cleaned oil films from the cleaning solution.

The ultrasonic/rinsing baths with the additional designation "...-ST" are equipped with an interface (potential-free contacts) for control and monitoring by an external control unit.
Application examples:
- Activation via relay of a PLC or robot controller
- Activation by means of control voltage from a PLC or robot controller
- Activation via manual switch and indication via signal light

For optimally coordinated ultrasonic cleaning, matching baskets, lids and cleaning and disinfection concentrates are available as accessories.

Zusätzliche Informationen

Weight	27,0 kg
Order number	8685
Internal dimension L [mm]	475
Internal dimension B [mm]	300
Inner dimension T [mm]	300/315
Capacity [l]	46,0
Work content [l]	31,0
Vol. to overflow. [l]	36,0
Level indicator	200
Level sensor	Conductivity sensor (no demineralised water, conductivity of the liquid > 20 µS/cm)
Ultrasonic tank material	Stainless steel 1.4404
Ultrasonic tank thickness [mm]	2,0
Shape of the tub corners	right-angled
Procedure	3-way ball valve G ½ incl. hose and hose nozzles, brass - galvanised, on the left-hand side
Overflow	Firmly shrink-wrapped with sealing cap G 1, on the right side
Overflow bag	on the right side
Tub floor	inclined
Operation	Rotary handle
Temp. set. (C)	30-80
Heat output [W]	1250
Operating voltage [V]	230 V~ (± 10 %), 50/60 Hz
Mains cable	2 m, fixed to the unit, with earthing contact plug CEE 7/7 (type E+F)
Outer dimension L [mm]	540
External dimension B [mm]	340
Outer dimension H [mm]	495
Housing material	Stainless steel 1.4301
Degree of protection housing	IP 32
Handles	on the sides
CE conformity	Low Voltage Directive 2014 / 35 / EU, EMC Directive 2014 / 30 / EU, RoHS Directive 2011 / 65 / EU
Packaging L [mm]	670
Packaging B [mm]	470
Packaging H [mm]	565